Livestock

Milking machine MDU

Pin
Send
Share
Send
Send


On large farms, milking cows takes just an enormous amount of time. To simplify the process, breeders get milking machines, but unfortunately not all of them are of high quality, and some, although good, do not pay for themselves. So you need to be able to understand them. This article describes the milking apparatus of the MDU, its main types and features.

Why do I need a milking machine

The quality and quantity of milk produced from cows is influenced not only by feeding, conditions of detention, but also milking. If it is done incorrectly, the product itself and even the cow may suffer. On large productions, special milking machines have been used for this procedure for a long time. On small farms, technological innovations are mostly skeptical. But if you choose the right machine, it will quickly pay for its cost and facilitate the maintenance of cows.

The peculiarity of milking machines is that they allow the maximum expression of all milk, which prevents the development of mastitis, stimulates milk production and reduces the time for milking. Many breeders fear that the machine may harm the cow’s nipples, but if you use it properly, there will be no pain.

The MDU milking machine is a whole range, featuring high quality. Each model has its own characteristics, characteristics.

Model MDU-2A

Read also these articles.
  • Apricot Variety Champion of the North
  • Breed of Cherry Valley ducks
  • How to bounce a goat after the first lambing
  • Best Egg Breeds

Photo of the milking machine MDU-2A

The milking machine MDU-2A is designed for 6 cows. The bucket in the kit is aluminum, 19 liters, but you can order a stainless steel 20 l instead, subject to a surcharge. The machine is already assembled and ready for use, so no need to waste time on the assembly. It is possible to work with this device both near the cow, and at a distance of up to 10 meters.

Specifications:

  • Engine power - 1.1 kW;
  • Productivity - 180 l / min;
  • Voltage - 220 V;
  • Duration of work - 10 years;
  • There is an emergency valve to prevent milk from getting into the engine;
  • Weight - 14 kg;
  • Dimensions - 47x21x46 cm.

The cost of such a device is 21,000 rubles on average.

Milking machine MDU-3B

Photo of the milking machine MDU-3B

Another unit of the series is the MDU-3B. It is designed for 10 cows. It comes with a 19 l aluminum bucket, but you can place an order for a 20 or 25 l stainless steel for a fee. He works next to a cow or at a distance of 20 meters.

Specifications:

  • Engine - 1.5 kW;
  • Productivity - 226 l / min;
  • Voltage - 220 V;
  • Oil consumption per year to 1.5 liters;
  • There is a receiver, and a safety valve in case of emergency;
  • The term of operation is 10 years;
  • Weight - 17.5 kg;
  • Dimensions - 48x26x52 cm

The cost is 22,000 rubles.

Model MDU-3V

We recommend reading our other articles.
  • Pinot Noir grape variety
  • How to make a goat feeders with their own hands
  • Diseases and control of apple trees
  • Onion Batun April

Photo of the milking machine MDU-3V Tandem

The MDU-3V milking machine is designed to work immediately with 10 cows. In the configuration is a bucket of 19 liters of aluminum. Separately, you can also order a stainless steel bucket for 20 or 25 liters, but you will have to pay for them. Work near a cow or at distance to 20 meters is possible.

Specifications:

  • Engine power - 1.5 kW;
  • Productivity is 226 l / min;
  • The consumption of lubricating oil per year is minimal - 0.4-1.5 liters;
  • Duration of work - 10 years;
  • There is an emergency valve and receiver 6 l;
  • Weight - 18.5 kg;
  • Dimensions - 55x24x56 cm.

The average cost is 22,000 rubles.

In addition, there is also a model MDU-3B-TANDEM. It is designed to work with 20 cows. The characteristics are almost the same as the model MDU-3B, but it works faster.

Milking machine MDU-5

Photo of the milking machine MDU-5

The milking machine MDU-5 is designed for milking a maximum of 3 cows at a time. It is equipped with an aluminum milking bucket for 19 liters, but you can additionally buy a stainless steel bucket for it at 20 liters, it is sold separately, so you have to pay about 4,000 rubles. Milking cups can be plastic or aluminum (optional). The device is already sold in assembled form, so it will not be necessary to assemble it after purchase. Milking is carried out near the cow or at a distance of 5-10 meters using an extension hose.

Specifications:

  • Designed for 3 cows;
  • Engine power - 1.5 kW;
  • Productivity - 200 l / min;
  • Voltage - 220 V;
  • Engine speed - 2850 rpm;
  • In the presence of 2 fans;
  • Air cooling;
  • Metal receiver - 6 l;
  • No noise;
  • There is a valve that prevents the ingress of milk into the engine;
  • Fireproof;
  • The service life is 10 years, but if it is repaired on time, it is much longer;
  • Weight - 15 kg;
  • Dimensions - 48x18x52 cm.

The approximate cost is 20,000 rubles.

Model MDU-7

Photo of the milking machine MDU-7

The MDU-7 milking machine is a mobile unit and is designed for 3 cows. Aluminum bucket for 19 liters, but you can order a stainless liter for 20 liters at a surcharge. The peculiarity of this model is that it can milk cows with a pulsator or without it. The machine does not make noise during operation, it is very quiet, so the animals are not afraid, which is especially important when a large herd. Possible milking near or at a distance of 10 meters when connecting an elongated hose. Milking cups can be ordered aluminum or plastic, the choice is and the pulsator (2-stroke or pairwise milking).

Specifications:

  • 1 kW engine;
  • Productivity - 180 l / min;
  • Engine rotation speed - 1400 rpm;
  • There is a valve that prevents the ingress of milk into the engine;
  • There is air cooling by fans;
  • Transparent receiver - 2 l;
  • The term of operation is about 10 years;
  • Weight - 12.5 kg;
  • Dimensions - 37x20x45 cm.

The approximate cost is 23,000 rubles.

Milking machine MDU-8

Photo of the milking machine MDU-8

The most modern model is the MDU-8. It is designed for milking 3 cows. It comes with a trolley for convenient movement of the device, but if it is not needed, it can always be folded and hidden, it does not take up much space. The control panel allows you to control the machine at a distance. The possibility of pulsating milking allows you to quickly accustom cows, which used to be finished by hand, to the machine. Then you can use the pulsator mode.

At the time of purchase, you can order an aluminum bucket (19 liters) or stainless steel (20 liters), aluminum or plastic glasses, as well as a 2-stroke or pairwise pulsator.

Specifications:

  • Engine power - 1 kW;
  • Productivity - 180 l / min;
  • Engine speed - 1400 rpm;
  • There is cooling with air fans;
  • There is a safety valve against the ingress of milk into the engine;
  • The term of operation is about 10 years;
  • Transparent receiver - 2 l;
  • The device is not noisy;
  • Weight - 25 kg;
  • Dimensions - 37x20x45 cm.

As you can see, the model is more than good and effective in operation, but it has a considerable cost. For this installation will need to pay about 24,000 rubles.

Reviews of the milking machine MDU

Understand how good this or that milking machine can be, having studied the reviews about it.

  • Marina Guy: "A year ago, we bought the milking machine MDU-5 because we were tired of manual milking, and since then I have only been using it for milking cows. The machine is comfortable, mobile, easy to carry, the milking time is much shorter when compared to manual procedures. Characteristics did not disappoint, the engine is good, there are no interruptions in work, and it’s convenient to use, it’s simple and not heavy, which is convenient for women. "
  • Andrey Merkushin: “Although we have only 7 cows on our farm, but constant milking is very exhausting. Therefore, my wife and I decided to buy a good milking machine. They chose a long time, stopped at MDU-2A. There is no time to finish. The machine is small, convenient in terms of carrying. So I recommend it to everyone! ".
  • Vadim Markov: “We have 15 cows on our farm, it’s impossible to milk them ourselves, even with the help of staff, so we decided to buy a milking machine. The MDU-3B was chosen based on feedback from friends. It’s convenient to use, it squeezes out all the milk. Considering that it is designed for 20 cows, it would be foolish to count on the ease of the machine. They installed it permanently, use it regularly and there were no problems yet. "

Pin
Send
Share
Send
Send